Residential Garage Floors
Diamond-ground prep, moisture-mitigating primer, and a flake or solid-color topcoat built to shrug off hot tire pickup and dropped tools.
Epoxy · PolyasparticResidential & Showroom Floor Coatings
We grind, prime, and coat garage floors, driveways, and patios across Middle Tennessee with epoxy, polyaspartic, and metallic systems built for hot tires, road salt, and July asphalt heat.
Locally owned & operated · Free on-site estimates · Most garages back in service in 2 days
What We Install
Every job starts with the same mechanical prep — what changes is the finish on top.
Diamond-ground prep, moisture-mitigating primer, and a flake or solid-color topcoat built to shrug off hot tire pickup and dropped tools.
Epoxy · PolyasparticUV-stable polyaspartic and broadcast systems rated for direct sun, freeze-thaw cycles, and de-icing salt without yellowing or delaminating.
PolyasparticMica pigments worked into wet epoxy for a marbled, three-dimensional look — sealed under a clear urethane or polyaspartic topcoat for daily wear.
Metallic EpoxyMaterials, Compared
| System | Foot Traffic | Vehicle Traffic | UV Stability | Typical Thickness | Best For |
|---|---|---|---|---|---|
| Epoxy Flake System | ~24 hrs | ~72 hrs | Can amber under direct UV over time | 20–30 mils | Garages, basements, shaded slabs |
| Polyaspartic Rapid-Cure | 2–4 hrs | ~24 hrs | UV-stable, holds color | 15–25 mils | Driveways, fast turnarounds |
| Metallic Epoxy | ~24 hrs | ~72 hrs | Needs polyaspartic topcoat for full UV stability | 20–30 mils + topcoat | Showrooms, retail, statement garages |
How An Install Runs
Day 1 · Morning
We mechanically profile the slab to a CSP 2–3 and vacuum-grind the dust. Grinding opens the concrete's pore structure so the coating bonds mechanically instead of peeling like a painted-on finish.
Day 1 · Midday
Control joints and cracks are filled, then a moisture-mitigating epoxy primer is rolled to block vapor transmission from the slab below.
Day 1 · Afternoon
The pigmented base coat goes down, and flake or metallic pigment is broadcast or worked in while it's still wet.
Day 2 · Morning
Excess flake is scraped flat, the floor is vacuumed clean, and seams or low spots get a second look before topcoat.
Day 2 · Afternoon
A clear polyaspartic or urethane topcoat seals the system and adds the chemical, abrasion, and UV resistance that does the long-term work.
Day 2 · Evening
The floor takes foot traffic that evening. Vehicles wait out the full cure — as little as 24 hours on polyaspartic, up to 72 on standard epoxy.
Our Promise
We're a new company, but we're not new to this trade. Every floor we install is backed by one straightforward promise: if it's not right, we make it right.
Ever Right Guarantee terms apply to residential installations booked directly with Volunteer Concrete Coatings. Full written terms provided at your free estimate.
Service Area
If you're in Middle Tennessee, we'll drive to you for a free estimate — no travel surcharge on residential jobs.
Get A Free Quote
Call or email with your address and what you're coating — garage, driveway, or patio — and we'll set up a free on-site estimate, usually within the week.